Description

NOTE

Vertical installation only.

SPECIFICATION

-Rated Power: 3000W

-Practical Power: 3000W(+-100W)

-Voltage: AC 110V

-Frequency: 50-60Hz

-Material: Brass, ABS, Stainless Steel

-Wire Request: Wire Cross Section ≥4mm²

-Temperature Regulation Range: 20-50°C/68-122°F

-Power Cord Length: 1.05m/3.44ft

-Water Pressure 0.04-1.2MPa

-Item Dimensions: 11*7*20cm/4.33*2.8*7.87in

-Gross Weight: 1.1kg/2.42lbs

-Net Weight: 0.95kg/2.1lbs

PACKAGE:

1*Water Heater

1*English Manual

4*Screws

The tankless water heater, with a power of 3000W, can quickly raise water temperature by 45°F at a flow rate of 0.3GPM or by 27°F at 0.5GPM. Adjusting the water flow allows you to control the outlet temperature: higher flow results in lower temperature, while lower flow leads to higher temperature. However, it’s important to note that this water heater is not suitable for showers, as showers typically require a minimum flow rate of 1.8 GPM.
Premium material: 304 stainless steel lining, 316L stainless steel heating pipe, sturdy ABS shell, uni-corrosion brass interface.
Multiple safety feature: Protection against leaks, dry-heating, electrical isolation, sensor faults, and grounding issues. With an IPX4 waterproof rating, it guarantees safe usage in various conditions, providing peace of mind.
Automatic standby mode ensures that you enjoy heated water at any time. One-touch operation provides convenience.
This mini water heater is ideal for limited spaces such as kitchens, apartments, bathrooms, RVs.
IMPORTANCE before purchase: 3000W at 110V draw max 27A, Required breaker 31AMP, Wire gauge 10AWG,Water connection G1/2
IMPORTANCE for installation: 1. Install vertically to avoid malfunction of the heating elements (E2); 2. Tighten the pipe connectors with Teflon tape to prevent a short circuit (E2).